TCS


Ford 300M Input Shaft

Ford 300M Input Shaft

TCS Billet Input Shaft for Ford E4OD, 4R100 and 5R110W.Made from 300M steel, this shaft is rated to 2000 lb/ft. of torque.Recommended for high torque applications...

$219.99

Ford 300 Maraging Input Shaft

Ford 300 Maraging Input Shaft

TCS 300 Maraging Steel Input Shaft for Ford E4OD, 4R100 and 5R110W.Made from 300 Maraging steel for extreme torsional rigidity.-Rated to 2500 lb/ft. of torque-Precision heat treated and ground-100% drop-in installation..

$349.99

Ford Aermet Input Shaft

Ford Aermet Input Shaft

TCS Aermet Input Shaft for Ford E4OD, 4R100, 5R110W.For extreme competition use.-Made from billet Aermet material-8% stronger than 300 Maraging shaft-100% drop-in installation..

$579.99

TCS FULL BILLET COMBO KIT

TCS FULL BILLET COMBO KIT

TCS FULL BILLET COMBO KITGet all of your billet components in one set.-Contains TCS full billet intermediate servo set, band strut, band anchor, 4.2:1 band lever and accumulator piston.-Recommended for any high quality build...!..

$209.99

TCS BILLET PUMP ROTOR

TCS BILLET PUMP ROTOR

TCS Billet Steel Pump Rotor for 700R4, 4L60E and 200-4R.Made from 4140 HTSR steel for high performance and high rpm applications.-100 drop-in replacement part-Available in 10 and 13 vane configurationsThis rotor is highly recommended any time sustained high rpm is expected, especially when running elevated line pressure. We us this rotor in all Stage 3 and higher transmission builds...

$149.99

TCS BILLET 4X4 OUTPUT SHAFT

TCS BILLET 4X4 OUTPUT SHAFT

TCS Billet Output Shaft for 4x4 4L60E TransmissionsThis shaft is much stronger than the OEM shaft, and recommended for all extreme duty applications.-Made from 300M steel-100% drop-in replacement partWe use this shaft exclusively in all Stage 3 and higher 4x4 transmission builds and build kits...

$379.99

TCS Billet Direct Drum

TCS Billet Direct Drum

TCS Billet Direct Drum with Extra Large Billet PistonReplace your OEM cast iron drum with this billet steel drum assembly from TCS. Made from billet steel for maximum strength, with extra large billet aluminum piston. Holds six full thickness frictions and steels. No need for thin, unreliable frictions and steels to add to your clutch count.-Made from billet steel to replace cast iron OEM drum.-Holds 6 full thickness..

$669.99

TCS BILLET INPUT SHAFT

TCS BILLET INPUT SHAFT

TCS PRODUCTS BILLET INPUT SHAFT AND HUBFor performance and heavy duty Dodge diesel applications.Highly recommended when running most multi-disc torque converters.-Made from 300 Maraging steel-35 spline 4140 tool steel hub (25% increase in spline count vs. OEM shaft)-Tested to 2700 lb/ft of torque...!We use this shaft exclusively in our in-house "Stage 3" and higher builds...

$674.99

TCS Direct Drum Spring Retainer

TCS Direct Drum Spring Retainer

TCS Heavy Duty Direct Drum Spring Retainer with 15 Springs.Recommended for use with OEM or billet steel drum.-Billet aluminum spring retainer.-Eliminates snap ring failure in the direct drum.-Utilizes 15 return springs set at 1.4" spring height...

$92.99

TCS BILLET INTERMEDIATE SERVO

TCS BILLET INTERMEDIATE SERVO

TCS BILLET INTERMEDIATE SERVO ASSEMBLYFull billet aluminum intermediate servo assembly. We use this servo assembly exclusively in all of our "Stage 3" and higher in-house builds.-Features dual metal sealing rings at each end of servo piston for virtually leak-proof performance.-Servo cover features a bronze bushing for servo pin support and positive lip seal to eliminate leaks at the pin bore...

$99.99

TCS BILLET INTERMEDIATE SHAFT

TCS BILLET INTERMEDIATE SHAFT

TCS PRODUCTS BILLET INTERMEDIATE SHAFTWe use this shaft exclusively on our in-house "Stage 4" builds, and when requested on any build.-Made from 300M steel with splines machined with a large blended radius to reduce fractures and cracking that can be found on OEM shaft.-Ideal for high horsepower applications.-Much stronger than OEM shaft...

$699.99

TCS BILLET ACCUMULATOR PISTON

TCS BILLET ACCUMULATOR PISTON

TCS Billet Accumulator PistonReplace the leaky, failure-prone plastic OEM accumulator piston with this billet aluminum piece.Featuring dual metal sealing rings at each end, leakage at the piston is virtually eliminated, and the durable billet aluminum will not fail under the increased pressures of a heavy duty valve body...

$42.99

TCS BILLET 4.2:1 BAND LEVER

TCS BILLET 4.2:1 BAND LEVER

TCS Billet 4.2:1 Ratio Intermediate Band LeverMuch stronger than stock, and CNC machined from 4140 steel, this band lever replaces the OEM lever in your transmission.-We have found the 4.2:1 ratio to be optimum for both holding power in 2nd gear, as well as timing for the  2-3 upshift and 3-2 downshift.-We recommend replacing this lever as a set, along with with the TCS billet steel band anchor and TCS billet st..

$36.99

TCS 300 MARAGING STEEL INTERMEDIATE SHAFT

TCS 300 MARAGING STEEL INTERMEDIATE SHAFT

THIS IS THE STRONGEST INTERMEDIATE SHAFT YOU CAN INSTALL IN YOUR TRANSMISSION!-Made from 300 Maraging steel-Stronger than the 300M intermediate shaft-Great for extreme competition and off-road applicationsWe use this shaft in our Stage 4 XTREME builds...

$999.99

TCS BILLET BAND ANCHOR

TCS BILLET BAND ANCHOR

TCS Billet Steel Band AnchorReplace your wear and failure-prone intermediate band anchor with this billet steel anchor from TCS.-We recommend replacing this item as a set, along with the TCS billet steel band strut and billet steel 4.2:1 ratio band lever...

$27.99

TCS BILLET BAND STRUT

TCS BILLET BAND STRUT

TCS Billet Steel Band StrutReplace your failure-prone intermediate band strut with this case hardened 1018 steel strut. At twice the thickness of the OEM strut, you won't bend this one...!-We recommend that you replace this strut as a set, along with the TCS billet steel band anchor and TCS billet steel 4.2:1 band lever...

$18.49

TCS BILLET OUTPUT SHAFT

TCS BILLET OUTPUT SHAFT

TCS Billet 23 Spline 4x4 Output Shaft AssemblyReplace your stock output shaft with this full billet shaft from TCS.-Fits 47RE and 48RE 4x4 transmission.-100% drop-in replacement part. No modifications necessary.-Made from 9310 Vacumelt steel. MUCH stronger than the OEM shaft!-Machined with a generous radius at the base of the splines to reduce stress at a common failure point...

$699.99

TCS EXTREME DUTY 29 SPLINE BILLET OUTPUT SHAFT

TCS EXTREME DUTY 29 SPLINE BILLET OUTPUT SHAFT

For the ultimate in strength, replace your output shaft with this TCS Extreme Duty 29 Spline Billet Output Shaft.-Increased shaft diameter from 1.230" to 1.480"-20% stronger than TCS standard drop-in replacement 23 spline billet shaft-Increased radius in the weak transition area at the end of the splines-Designed for EXTREME DUTY applicationsRequires 29 spline transfer case input shaft; OEM Part # 05086311-AA or equi..

$699.99

TCS 47RH Billet Output Shaft

TCS 47RH Billet Output Shaft

TCS Billet Output Shaft Assembly for 47RH.For earlier 4x4 RH transmissions with hydraulic governor only.-Made from 9310 Vacumelt steel for maximum torsional strength-Precision machined, ground and heat treated.-Spline radius increased to protect  failure-prone area...

$548.99

Showing 1 to 19 of 19 (1 Pages)